跳至主要内容

The Preferred Material For Badge Making

Soft epoxy badges, soft epoxy key chains and other badges are made of PVC material. PVC material have always been the material of choice for badge manufacturers to make soft  epoxy products, which is inseparable from the related characteristics of PVC.

PVC material is polyvinyl chloride, which is one of the largest plastic products in the world. Due to the rich synthetic raw materials of PVC resin, the demand for low price is increasing rapidly, and its status is gradually strengthened. The polyvinyl chloride resin is a white or light yellow powder and cannot be used alone and must be modified. PVC is a white powder with an amorphous structure, which has a small degree of branching and poor stability to light and heat. Different additives can be added according to different purposes, and polyvinyl chloride plastic can exhibit different physical properties and mechanical properties. A variety of hard, soft and transparent articles can be made by adding an appropriate amount of plasticizer to the polyvinyl chloride resin.

The PVC material is a polymer obtained by radical polymerization of vinyl chloride monomer, and it relegated to the second place in the late 1960s. According to the molecular weight, PVC can be divided into two types: general type and high concentration type. The average polymerization degree of general-purpose PVC is 500~~150, and the average degree of polymerization of high-polymerity PVC is more than 1700.

Plastics such as PP, PET, PE, etc., are not used by the badge making industry because their characteristics are not suitable for the characteristics of the badge. PVC is also a toxic material, but with the advancement of technology, it is gratifying to have developed environmentally friendly and non-toxic PVC, which is a great blessing for customers who make badges, especially soft epoxy products

Whatever you need is normal badges or  RFID badges,  CXJ Card Factory can offer what you wanna.

评论

发表评论

此博客中的热门博文

What Can UV Print?

"UV" means ultraviolet light.It is basically a form of piezoelectric ink-jet printing.The idea is that the UV waves emitted by the LED light react with the curing photosensitive agent in the UV ink, causing the pigment molecules in UV ink to solidify  the material surface, thus completing the printing action. UV printing is not limited by any material, can be in glass, plate, crystal, PVC, acrylic, metal, plastic, stone, leather and other surface color photo printing.It prints in one go without any plate making.UV plate printing color is beautiful and rich, wear resistance. UV protection, simple and convenient operation, printing image speed, in line with industrial printing standards, so also has a wide range of applications. Summarize The advantages Of UV Printing Wide application range, can be applied to many materials. Environmental protection.On the one hand noise pollution is relatively low, on the other hand unlike silk-screen printing with ...
发表评论
阅读全文

What should I do if my card is not recycled?

You can cut out the card if the bank doesn't recycle it. But remember a few key points: Confirm with the bank and cancel the card completely. The back magnetic strip should be cut completely: cut completely from left to right. A single cut in the middle is useless. Personal information can still be read. Personal signature, cardholder's name part to be painted or cut out separately, throw away. The card number part had better also cut open. If it is PBOC 2.0 IC card (with both magnetic strip and contact IC card), it needs to destroy IC chip at the same time As for the following schemes: Burn off card: the PVC material of magnetic card adds flame retardant commonly, so combustion has certain problem. Strong magnet degaussing: at present, there is a widely used magnetic card technology, called "strong anti-magnetic". It has certain protective ability to magnetic field, so it is not safe. If you find my article very helpful and interested in me, you may...
发表评论
阅读全文